Hili HQ

How to find the age of your water heater, furnace or appliance

6 min read

Quick answer

Look for the metal or foil data tag on the unit. Many tags print a manufacture date directly; otherwise the date is usually encoded in the serial number, and the format differs by brand. The manufacturer's website or support line can confirm how to read it.

Knowing when a water heater or furnace was made tells you how much life it may have left, whether it might still be under warranty, and what a replacement conversation will look like.

  1. 1

    Find the data tag

    Water heaters: a label on the side of the tank. Furnaces: inside the front panel door. Outdoor AC and heat pumps: a plate on the side of the cabinet. Refrigerators: inside the fresh-food section or behind the bottom grille. Washers and dryers: inside the door or lid.

    Capture this: Photograph the whole tag straight on, in good light, with no glare.

  2. 2

    Look for a printed date first

    Many tags print "Mfg. date" or "Date of manufacture" outright. If it is there, you are done.

  3. 3

    Otherwise, read the serial number

    Many brands hide the year and month or week in the serial — often in the first few characters, sometimes as a letter code. Formats vary by brand and have changed over the years, so check the manufacturer's own guidance rather than guessing.

  4. 4

    Note model number and specs

    The model number tells a technician the exact unit and its parts. Also note capacity (gallons, BTU, tonnage), fuel type and voltage.

Signs it may be near the end

  • Rust-colored water or a leaking tank on a water heater.
  • Frequent repairs, uneven heating or rising energy bills on a furnace.
  • Any unusual noise, smell or tripped breaker is worth a professional look.

How Hili helps

One photo, the whole record

Take a photo of the tag in Hili and it reads the brand, model and serial for you. A date Hili can't confirm is marked "est." and waits for you to check it — nothing is guessed into your record.

General guidance only. For anything involving gas, electrical or structural work, check with a licensed professional.

More guides